Monday, 2 June 2008

Step 1 - The Rocker table.

I built the rocker table a year ago using two sheets of white combi board (1600mm X 600mm) and 2 lengths of 2x4 (1600mm) and a packet of wood screws. The combi boards I left their orginal length and cut the 2x4 50mm shorter than the table. The one sheet of the combi board is to be used as the table base while the other sheet is to be used for the actual rocker. See the pics below. A rocker table is used to introduce a curve to the board.

rocker table top
rocker table
rocker table

No comments:

Post a Comment